Snap Nurge 190-C 2-in-1 Clamp - Replacement Head

Replacement clamp for Nurge embroidery stands, with a 2-in-1 system that holds both Snap Frame hoops and conventional hoops. It is the part you need if you already have a Nurge stand, such as the popular 190-14, and want to start working with Snap Frame hoops without buying a new stand.

Switching between one system and the other takes a minute: remove the two screws, turn the upper and lower halves of the clamp 180 degrees, and put them back. This allows you to have several projects underway, one in a hoop and the other in a Snap Frame, and alternate between them using the same stand. The head tilts 120 degrees from left to right and rotates a full 360 degrees, so you can go to the back of the embroidery to finish a thread without removing the frame.

It is the head that comes standard on the Nurge 190-24 stand, available here separately for those who already have another model in the range and want to expand it.

Key features:

• 2-in-1 system: holds Snap Frame hoops and hoops, interchangeable by turning its two halves 180 degrees.
• Snap Frame compatibility: any size, with tubes 20 to 30 mm thick.
• Hoop compatibility: from 100 to 310 mm in diameter and up to 24 mm deep.
• Swivel head: 120 degrees from side to side and 360 degrees of rotation.
• Quick change: only two screws, no special tools.

Note: this product is only the replacement head. It DOES NOT include the embroidery stand, hoops, or frames; the images are for illustrative purposes only. Check compatibility with your Nurge stand model before purchasing.